Annex Tempered and Annex Heat Strengthened glasses are produced by processing different glass types through a tempering furnace, which includes uniformly heating the glass, typically at 620 ̊C, and then rapidly cooling or quenching the glass by simultaneously blowing an evenly distributed cool air using high pressure air nozzles on both surfaces. High airflow rates produce tempered glass (Annex Tempered) and much lower airflow rates produce Annex Heat Strengthened. Both, Annex Tempered and Annex Heat Strengthened glasses have increased strength to resist higher levels of impact, mechanical load and thermal stress.
Capabilities
- Size range: (300 x 300) mm - (2440 x 5000) mm
- Thickness range: (4 - 19) mm
- Types of glasses: Clear, Tinted, Reflective Soft Coat, Reflective Hard Coat, Low E
Annex Heat Strengthened glasses are produced by processing different glass types through a tempering furnace, which includes uniformly heating the glass, typically at 620 ̊C, and then rapidly cooling or quenching the glass by simultaneously blowing an evenly distributed cool air using high pressure air nozzles on both surfaces. Lower airflow rates produce Heat Strengthened glass. Annex Heat Strengthened glasses have increased strength to resist higher levels of impact, mechanical load and thermal stress.
Capabilities
- Size range: (300 x 300) mm - (2440 x 5000) mm
- Thickness range: (4 - 19) mm
- Types of glasses: Clear, Tinted, Reflective Soft Coat, Reflective Hard Coat, Low E
Insulated glazing/glass is a piece of glazing/glass consisting of
two or more layers of glazing/glass separated by an aluminum spacer along the edge and sealed to create an air space between the layers. It is mounted in a sash or frame like a thick piece of glass. By combining Low E coatings, Tinted Glasses, Reflective Coatings, Silk-screened Patterns, Laminated Glass Products and more, a wide variety of Insulating Glass Configuration available to satisfy a wide range of performance and aesthetic requirements.
Capabilities
- Size range: (320 x 160) mm - (2500 x 5000) mm
- Thickness range: (4 - 19) mm
- Spacer frames thickness: (6 - 32) mm
- Max Thickness of Double glazed unit: 65 mm
- Types of Glazing: Double Glazing, Triple Glazing, and Step Glazing.
Annex Secure is used where ballistic defense or heightened security measures are required. Annex Secure (“bullet resistant glass” or “ballistic glass”) is achieved through multiple layering of tempered and/or laminated glass where several lites of glass are bonded together by a polycarbonate material, typically Polyvinyl Butyral (PVB). It is this PVB interlayer which essentially helps sustain
a bullet’s blow and slows down its penetration.
From podium enclosures to glass casings and storage of important data or files, top-grade bullet-resistant glass from Annex is the solution for the demanding safety requirements in India, or anywhere.
Capabilities
- Size range: (250 x 550) mm - (2600 x 5000) mm
- Thickness range: (4 - 19) mm
- Maximum thickness of lamination: 60mm

Annex Lami consists of two or more lites of glass bonded together by an adhesive material, typically Poly Vinyl Butyl (PVB). This invisible PVB layer is designed to keep the glass integral to the structure upon breakage, rather than allowing the glass to shatter into otherwise large, sharp, and dangerous pieces. PVB also dulls the edges of broken shards of glass, significantly lowering the risk of injury. After undergoing a
series of heating and pressing, the two lites of glass and PVB interlayer become one solid, durable glass. The whole laminating line complies with directives of ASTM and other international standards.
Capabilities
- The whole laminating line complies with directives of 73/23/CE, 89/336/CEE, 98/37/CE and in particular electrical equipment and cabinets are realized according to rules EN 60204-1 e EN 60439.
- Size range: (250 x 550) mm - (2600 x 5000) mm
- Thickness range: (4 - 19) mm
- Maximum thickness of laminated panel: 60mm
- Types of glasses: Clear, Tinted, Reflective Soft Coat, Reflective Hard Coat, Low E
The success of a design project relies on cutting-edge innovation and flawless execution. Our team of project managers and expert craftsmen know the latest fabrication styles and techniques, they strive to make your glass applications stand out and stay unique, whether shower cubicles, all-glass doors and entry systems, table tops, mirrors, or other glass constructions.
- Beveling
- Other Customized Edgeworks, Milling and Drilling
- Glass Surface Custom Fabrication Services